FSB260 combined to form a single unit | FSB260 pusher version with conveyor screw kit |
The ideal model series when a maximum amount of force is required. This press is used for the briquetting of coarse metal chips. In addition to its extremely robust design, the FSB260 model series with 15 kW drive output offers custom-tailored system solutions. The individual assemblies, like the drive unit, press unit and push fl oor, can be set up in many diverse arrangements. Moreover, the FSB260 is also a compact system, comprised of base frame, collecting tray and rotatable briquette transport tube, forming an ideal unit. This model series is available in the tong version or in the pusher version. The FCB112 offers an outstanding price/performance ratio, because the following equipment is provided by standard:
- PLC control unit M238 Schneider Electric, command input through 3.8 inch touch panel colored
- Password-protected input with classifi ed user rights
- Manual and automatic operation
- 5 available dosing recipes with fi lling time control and dosing time limit, briquette hardness and length control, and conveyor screw control inc. reversal
- Available machine confi gurations such as briquette container monitor, silo discharge, briquette strand measurement, coolant control and control for press mechanism cooling circuit
- Day and weekly timer, diverse level controls for silo
- Fault message with error logging, hours of operation recording
- Oil cooler with thermostat, oil temperature and oil level safety circuit
- Electrical hydraulic control unit for discharge
- Connection terminals for external Start/Stop and Emergency STOP commands
- Potential-free relay contacts for interfaces and remote displays
Daten:
Briquette diameter | 61 mm |
Briquette length regulation | 30-120 mm |
Nominal output depending on chips | 150-200 kg/h |
Drive output with soft starter | 15 kW, 1500 rpm |
Discharge drive output / oil cooler | 2.2 / 0.11 kW, 1500 / 2500 rpm |
Connected load | 3x 400 VAC+N+PE, 50 Hz |
Recommended pre-fusing | 40 Amp |
Hydraulic oil fi lling | 130 l |
Weight without oil | Hydraulic unit approx. 340 kg, press unit approx. 360 kg |
FSB260 pusher version with push fl oor FDK Compact design for compressing wet aluminium chips |
|
Downloads |
German | English | French |