FKB110 with push floor FAK |
FKB90 with conveyor screw kit |
In the 5.5 kW and 7.5 kW output ranges, the FKB90 and FKB110 hydraulic briquetters offer a compact construction and individualised setup options. The unique modular system enables an optimal system solution
- PLC control unit M238 Schneider Electric, command input through 3.8 inch touch panel colored
- Password-protected input with classified user rights
- Manual and automatic operation
- 5 available dosing recipes with fi lling time control and dosing time limit, briquette hardness and length control, and conveyor screw control inc. reversal
- Available machine confi gurations such as briquette container monitor, silo discharge, briquette strand measurement, coolant control and control for press mechanism cooling circuit
- Day and weekly timer, diverse level controls for silo
- Oil temperature and oil level safety circuit
- Electrical hydraulic control unit for discharge
- Potential-free relay contacts for interfaces and remote displays
Data:
Briquette diameter | 61 mm | |
Briquette length regulation | 30-100 mm | |
Nominal output depending on chips | FKB90: 50-85 kg/h, FKB110: 70-110 kg/h | |
Drive output with soft starter | 5.5 kW or 7.5 kW, 1500 U/min | |
Connected load | 3x 400 VAC+N+PE, 50 Hz | |
Recommended pre-fusing | 25 Amp. | |
Hydraulic oil filling | 120 l | |
Weight without oil | Hydraulic unit approx. 230 kg, press unit approx. 250 kg |
FKB 110 expanded into a compact unit on a basic frame |
Through direct set-up on the floor, a minimum silo discharge height is achieved |
Downloads |
German |
English | French |