FM briquetting presses are first-class products and are equipped as standard with the following features:
- Siemens S7-1200 PLC controller, command input via 4-inch color touchscreen
- Password-protected entry with classified user rights
- Manual and automatic operation
- 5 preselectable dosing recipes with filling time control and dosing time limit, briquette hardness and length control
- Screw conveyor control including reversing
- Available machine configurations such as briquette container monitoring, silo discharge, briquette strand measurement, coolant control and control for cooling circuit press mechanism
- Daily and weekly timer, various level controls for chip silo
- Fault reporting with error analysis, recording of operating hours
- Safety circuit for oil temperature and oil level
- Electro-hydraulic control for discharge and material displacement
- Connection terminals for external start-stop and emergency-stop commands
- Potential-free relay contacts for interfaces and remote displays
Technical specifications
Briquette diameter: | 61 mm |
Briquette regulation: | 30-100 mm |
Rated power depending on the type of chips: | FKB90: 50-85 kg/h, FKB110: 70-110 kg/h |
Drive power with soft starter: | 5.5 kW or 7.5 kW, 1500 rpm |
Connection rating: | 3x 400 VAC+N+PE, 50 Hz |
Recommended backup: | 25 Amp. |
Hydraulic oil fill: | 120 liters weight without moving floor and oil filling |
Drive unit: | approx. 230 kg, pressing unit approx. 250 kg |
Examples of systems in use
